THE µPL TRAINER

For a full description of the µPL Trainer visit its own web page - CLICK HERE

CLICK to ZOOM IN



THE µPL TRAINER's REAR VIEW

BACK

REAR VIEW KEY

PIC-ICD Pod Unit
Connected to the PC's Serial Comms. Port 0
PIC-ICD Cable (Project)

Used to Program the User's Project PIC
   

NOTE: IF THE ABOVE IS TO BE CONNECTED THEN THE PIC-ICD
DOWNLOAD CABLE BELOW MUST BE DISCONNECTED AND VISA-VERSA

PIC-ICD Download Cable

This cable can be connected in 1 of 2 positions:

  • To the µPL Trainer as shown above
  • To the PIC Demo Board as shown HERE
ByteBlaster Pod Unit
Connected to the PC's Parallel Port
ByteBlaster Cable (µPL)
Used to Configure the µPL Trainer's FPGA and its Configuration Device
   


NOTE: IF THE ABOVE IS TO BE CONNECTED THEN THE BYTEBLASTER
CABLE (PROJECT) BELOW MUST BE DISCONNECTED AND VISA-VERSA

ByteBlaster Cable (Project)
Used to Configure the User's Project FPGA and Configuration Devices
To 9V DC Plug Power Supply
Connected to Supply the µPL with Power
To PC Comm. Port 1
Connected to the µPL's Own Serial RS-232 Port Via an Optional Serial Switch Box

BACK